Razor blade stainless strip steel W.-Nr. 1.4037 ( DIN X65Cr13 ) - AISI 420D
Stainless razor blade steel is a special martensitic stainless steel with good punching properities, good hardenability
and toughness. These material properities and narrow tolerances in width, thickness, flatness and straightness allow
efficient processing in the final production lines as well as extraordinary consumer comfort.
Cold rolled razor blade steel is rolled in mills especially designed for this purpose.
Modern heat treatment equipment and automatic gauge controls allow us to produce faultless products according to
the requirements specifications.
Our razor blade steel martensitic stainless W.-Nr. 1.4037 ( DIN X65Cr13 ) is suitable for hardening and grinding to a
sharp edge. The steel is free from harmful inclusions, which could cause irregularity of the cutting edge.
Our customers, in this product area, manufacture conventional razor blades, disposable razors, system razors, lady razors
and other thin blades.
Chemical composition ( in weight % )
Cold rolled / annealed
The normal used dimensions
Tolerance on thickness: +/- 0.005mm
Tolerance on width: +/- 0.025mm
The weight of single coil is about 20KGS
Hardness: HV 280 - 320
Inside diameter: 280mm
Some major razor blade manufacturing steps are:
* Hardening and tempering
* Sputtering / PFTE- coating
widely used to produce high quality razor blades, surgical scalpels etc.
We are looking forward to your enquiries.
Please call +86 151 9025 7143, skype: paul_luhongxiang
or send an email to export @ ahoneststeel dot com